Select Page

LOADERS

TRACKED DEERE LOADER

Where to find TRACKED DEERE LOADER in Framingham / Hudson

Image for reference only
Actual item may look different
Click on image for larger view

Click on above thumbnails for alternate view

Daily: $399.00

Weekly: $1,576.00

Quantity: for a period of  
day(s)   week(s)  


Additional Information

+++ THIS ITEM CAN BE PICKED UP AT THE HUDSON LOCATION +++
+++ DELIVERY CAN BE ARRANGED BY EITHER STORE +++

A Skid Steer is often referred to as a Bobcat, which is a name of a specific brand of skid steers. Skid Steers get their name from the fact that in order to make a turn, the tires "skid" in opposite directions, one side going forward and the other side stationary or in reverse. This allows the machine to perform a zero-radius turn. They are also referred to as skid loaders.

A tracked loader differs from a wheeled skid steer in that rather than four wheels, it operates on two rubber tracks. The tracks allow it to get better traction while creating less ground pressure, this makes it ideal for soft surfaces where a wheeled loader would be likely to dig in or get stuck. Our John Deere tracked machine is considerably more power than similar sized wheeled machines.

We offer the John Deere 322CT, a hard-working tracked skid-steer loader, with lots of maneuverability and great all-around performance and productivity. Our John Deere will outperform most comparable size machines, meaning you will get more done in less time!

Please note this machine requires a 3/4 ton truck (250 or 2500 series) to tow it with one of our trailers. Delivery is available

PLEASE NOTE:
Under Massachusetts Law a Hoisting Engineers License is required to operate this machine. If you do not have one, you can get a Temporary Hoisting Permit.

To get a Temporary Hoisting Permit please go to https://www.atleisurelicense.com/temp_permits and enter our Rental Facility ID Number which is 0177317


Dimensions
A. LENGTH WITH BUCKET 10.5 ft in 3195 mm
B. WIDTH OVER TIRES 5.8 ft in 1773 mm
C. HEIGHT TO TOP OF CAB 6.4 ft in 1951 mm
D. WHEELBASE 3.5 ft in 1074 mm
E. GROUND CLEARANCE 9.6 in 244 mm
F. LENGTH W/O BUCKET 8.5 ft in 2591 mm
G. CLEARANCE AT MAX LIFT AND DUMP 7.5 ft in 2290 mm
H. REACH AT MAX LIFT AND DUMP 28.1 in 714 mm

Engine
MAKE John Deere
MODEL 4024T
GROSS POWER 66 hp 49.2 kw
NET POWER 62 hp 46.2 kw
POWER MEASURED @ 2800 rpm
DISPLACEMENT 149 cu in 2.4 L
ASPIRATION Turbocharged
NUMBER OF CYLINDERS 4

Operational
OPERATIONAL WEIGHT 6435 lb 2918.9 kg
FUEL CAPACITY 16 gal 60.6 L
MAX SPEED 6.8 mph 10.9 km/h
TIRE SIZE 12x16.5 10 PR SKS
OPERATING VOLTAGE 12 V
ALTERNATOR SUPPLIED AMPERAGE 70 amps

Loader
OPERATING LOAD RATING 1950 lb 884.5 kg
TIPPING LOAD 3900 lb 1769 kg
BREAKOUT FORCE 5500 lb 2494.8 kg
BUCKET CAPACITY 0.59 yd3 0.45 m3

Hydraulic
PUMP FLOW CAPACITY 19 gal/min 72 L/min
RELIEF VALVE PRESSURE 3450 psi 23786.9 kPa

Dimensions
LENGTH WITH BUCKET 10.5 ft in 3195 mm
LENGTH W/O BUCKET 8.5 ft in 2591 mm
WIDTH OVER TIRES 5.8 ft in 1773 mm
HEIGHT TO TOP OF CAB 6.4 ft in 1951 mm
CLEARANCE AT MAX LIFT AND DUMP 7.5 ft in 2290 mm
WHEELBASE 3.5 ft in 1074 mm
GROUND CLEARANCE 9.6 in 244 mm
REACH AT MAX LIFT AND DUMP 28.1 in 714 mm
TURNING RADIUS FROM CENTER - INC BUCKET 78.9 in 2004 mm

Also check the following item(s) related to the above:

* Please call us with any questions you may have about our tracked deere loader in Framingham & Hudson Massachusetts, serving MetroWest and Middlesex County since 1874.

FRAMINGHAM, MA

1 Nicholas Rd.
Near Central St & Water St
Framingham, MA 01701

Hardware
(508) 877-1888

Rental & Repair
(508) 877-2840

HUDSON, MA

31 Washington St.
By the Downtown Rotary
Hudson, MA 01749

Hardware
(978) 562-7316

Rental & Repair
(978) 562-7317

HOURS

Mon-Sat: 7:30 AM-5:00 PM
Sun: 10:00 AM-4:00 PM